Sharp UX-CD600 - Manual (Page 129)

Problems and Solutions
127
10. T
roub
le-
shooting
Dark vertical lines appear
on copies and received
faxes. • Try changing the print contrast setting to LIGHT
(see page 29).
General problems
Problem Solution
Auto-dial numbers cannot
be stored in the machine. • Make sure the machine is plugged in and the
imaging film has been loaded. (Auto-dial numbers
cannot be stored if the imaging film has not been
loaded.) See
Loading the Imaging Film in Chapter
1.
Nothing appears in the
display. • Make sure the power cord is properly plugged into
a power outlet.
• Connect another electrical appliance to the outlet to
see if it has power.
The machine does not
operate correctly. • Unplug the power cord and then plug it in again
several seconds later.
Automatic document
feeding does not work for
transmission or copying. • Check the size and weight of the document (see
Transmittable Documents on page 82).
VOICE MAIL continues to
appear in the display after
you have listened to or
erased messages
received in your voice mail
service. • Follow the procedure on page 38 to disable the
voice mail message indicator (select NO in Step 5).
After pressing in Step 6 to return to the date
and time display, make sure that VOICE MAIL no
longer appears, and then repeat the procedure to
enable the voice mail message indicator (select
YES) in step 5.
STOP
all.book 127 ページ ２００４年６月２２日 火曜日 午後１２時１分