Sharp UX-CD600 - Manual (Page 57)

Using the Intercom Feature
55
2. Cordless
Handset
Paging a cordless handset from the machine
(cordless handset locator)
You can use this procedure to page a cordless handset, or locate a handset in
the event that you misplace it.
1
Pick up the machine handset.
•
If you wish to use the speakerphone, skip this step (the speaker will
activate automatically in Step 2 below).
2
Press on the machine, and
enter the number of the cordless
handset that you wish to page.
Example:
3
The selected cordless handset rings.
•
This allows you to locate the cordless
handset if you have misplaced it.
4
The other person presses any key (except ) on the cordless
handset to answer.
5
Talk with the other person (if you use the speakerphone, speak toward
“MIC” on the operation panel). When you are ready to end the
conversation, replace the handset or press as appropriate.
INTERCOM/
CONFERENCE
OFF OFF
SPEAKER
INTERCOM
0: BASE STATION
Machine display:
Display of selected
cordless handset:
INTERCOM
3: SUE
If a call comes in while the Intercom feature is being used
If an outside call comes in while you are using the Intercom feature, the
person who wishes to take the call should first stop the Intercom call (press
on the cordless handset or replace the machine handset), and then
answer the outside call (press any key except on the cordless handset
or pick up the machine handset).
OFF OFF
OFF OFF
all.book 55 ページ ２００４年６月２２日 火曜日 午後１２時１分