Sharp UX-CD600 - Manual (Page 131)

Problems and Solutions
129
10. T
roub
le-
shooting
You hear noise or
interference during a call. • Make sure the base antenna is fully upright on the
machine (see page 20). If the antenna is upright
and you still hear noise, try moving the antenna
forward or backward.
• Other electrical appliances may cause interference.
Move away from any electrical appliances,
including notebook computers and access points
that communicate on a wireless LAN.
• Move closer to the machine. Note that large metal
objects, metal structures, and thick walls between
the machine and cordless handset will reduce the
talking range. If needed, try moving the machine to
a different location.
You hear beeps during a
call. • You will hear beeps during a call and LOW
BATTERY will appear in the display if the battery is
low. Place the cordless handset in the charger and
let it recharge. If you hear beeps during a call and
need to continue the call, press to transfer the
call to the machine.
When you press
or , the name of one
of the other cordless
handsets does not appear
in the list (only the number
appears), even though a
name has been
programmed for that
cordless handset.
• The name was not transmitted to your cordless
handset when it was entered (probably because
your cordless handset was in use). To retransmit
the name, repeat the name entry procedure on
page 23 (in Step 5, enter the number of the
cordless handset whose name does not appear).
INTER
COM
INTERCOM/
CONFERENCE
INTER
COM
all.book 129 ページ ２００４年６月２２日 火曜日 午後１２時１分