Sharp UX-CD600 - Manual (Page 49)

Using Auto Attendant Mode
47
2. Cordless
Handset
1
Press once and once on
the machine.
2
Press once and 4 times.
3
Press once.
4
Press a number from 1 to 4 to select the desired pseudo ring time.
: 15 seconds : 30 seconds
: 60 seconds : 120 seconds
5
Press to return to the date and time display.
FUNCTION
STOP
FAX SIGNAL RX
PSEUDO RING
1=15 SECONDS
The display briefly shows
your selection, then:
Machine display:
OPTION SETTING
PSEUDO RING
Setting the ring duration
In Auto Attendant mode, after the caller listens to your greeting and presses a
key to call a particular person, the cordless handset of that person (or the
machine handset) will make a special ringing sound (called pseudo ringing)
for 15 seconds.
If the call is not answered during this time, the answering system will activate
and the OGM (greeting) recorded for the personal box corresponding to the
cordless handset will play (if an OGM for the personal box has not been
recorded, the general OGM will play). This allows the caller to leave a
message. (See Chapter 3.)
If desired, you can change the amount of time the cordless handset will ring
before the answering system activates. Selections for the duration are 15
seconds (this is the initial setting), 30 seconds, 60 seconds, and 120 seconds.
Use the operation panel of the machine to change the setting.
all.book 47 ページ ２００４年６月２２日 火曜日 午後１２時１分