Sun Microsystems Sun Fire V40z - Manual (Page 30)

24 Sun Fire V20z and Sun Fire V40z Servers Linux Operating System Installation Guide • May, 2004
20. Copy the RPM selection file to the proper directory by typing the following
command:
If the systems you are building are single-processor systems, type the following
command:
# cp /tmp/sles8-pxefiles/Sunfire.sel.up \
/home/pxeboot/SunFire_sles8/sles8-x86_64/ \
CD1/suse/setup/descr/Sunfire.sel
If the systems you are building have more than one processor, type the following
command:
# cp /tmp/sles8-pxefiles/Sunfire.sel.smp \
/home/pxeboot/SunFire_sles8/sles8-x86_64/ \
CD1/suse/setup/descr/Sunfire.sel
21. Update the package description files by typing the following commands:
# cd /home/pxeboot/SunFire_sles8/sles8-x86_64/CD1/suse/
# /usr/lib/YaST2/bin/create_package_descr \
-d /home/pxeboot/SunFire_sles8/sles8-x86_64/CD1/suse/ \
-l english
Note – If the create_package_descr program is not found, be sure to install the
autoyast2 package .
22. Modify the available packages list by typing the following command:
# echo "Sunfire.sel" >> \
/home/pxeboot/SunFire_sles8/sles8-x86_64/ \
CD1/suse/setup/descr/selections
This ensures that the new selection package that was added will be seen by the
installer.