Savin RCP40 - Manual (Page 35)

Installing the Raster Printer Language Printer Driver
29
2
HHHH
Change the drive name in the list box to the name of the CD-ROM drive,
and then click [Browse].
IIII
Double-click [DRIVERS], and then [WINNT40]. Then double-click the folder of
the appropriate language for the operating system.
JJJJ
Click [Open].
KKKK
Click [OK].
A dialog box for selecting the machine model appears.
LLLL
Click to select the name of the machine whose driver you want to install,
and then click [Next].
A dialog box for changing the printer name appears.
Important
❒ Select the printer driver for your machine as shown.
MMMM
Change the name of the machine if you want, and then click [Next].
NNNN
If you want to share this machine over the network, select [Shared]. If not,
select [Not shared]. Press [Next] to continue.
Note
❒ When selecting [Shared], if necessary enter the location of the machine and
a comment about the machine.
OOOO
In the next dialog box you will be asked to print a test page. Select [No] and
then click [Finish].
Note
❒ Print a test page after completing installation and restarting Windows.
PPPP
The installation is complete.
Machine model Machine resolution Priter driver
Type A 600 dpi 600 dpi Type40 600
Type A 400 dpi 400 dpi Type40 400 A
Type B 400 dpi Type40 400 B