Savin RCP40 - Manual (Page 21)

Network Settings
15
1
- - - -About addresses
❖ ❖ ❖ ❖ Subnet mask
Mask value for using one part of an IP Address as a network address.
❖ ❖ ❖ ❖ Default gateway address
Host or router address used as a gateway when negotiating with (printing, in-
formation gathering) a workstation on a different network.
Note
❒ Check with your network administrator for the address to be set.
❒ If you do not know the address to be set, use the factory settings.
- - - -About access control
The access control address and the access control mask are used to limit a print-
able workstation, by using an IP address. If it is not necessary to limit printing,
set “0.0.0.0”.
Note
❒ If the access control address mask and the mask of the address of the work-
station trying to print is the same, then access will be granted.
❒ For example, if the access control address is set to 192.168.15.16, depending
on the mask value, the address of the accessible workstation is as follows:
(XXX can be any value).
Access control mask Accessible Addresses
0. 0. 0. 0 XXX.XXX.XXX.XXX
255. 0. 0. 0 192.XXX.XXX.XXX
255.255. 0. 0 192.168.XXX.XXX
255.255.255. 0 192.168. 15.XXX
255.255.255.255 192.168. 15. 16