Savin RCP40 - Manual (Page 24)

Getting Started
18
1
Connecting the Network Cable to the Machine
Important
❒ Before connecting an interface cable between the machine and a computer,
make sure that the machine is not operating, and then turn off the main power
switches of the machine and the computer.
❒ Be sure to use the designated interface cable. Using another cable may cause
radio interference.
After setting up this machine to support the network environment, connect the
Ethernet interface cable. Connect a 10BASE-T or 100BASE-TX cable to the Ether-
net board.
AAAA
Connect the Ethernet interface cable into the Ethernet interface at the right
side of the back of the machine.
❖ ❖ ❖ ❖ Type A
❖ ❖ ❖ ❖ Type B
ZJXH170J