Sub-Zero 427R - Manual (Page 45)

Model WS-30 Installation 45
subzero.com
Framed Panel
RAISED PANEL
With some door panel designs, you may have to rout,
recess or use optional extended handles to allow for finger
clearance. This is particularly true if your unit has raised
panels greater than 1 / 4 " (6) total thickness.
Check the location of offset when you’re using specific
routing for the grip area only. Refer to the Sub-Zero design
guide for a full-scale template of the standard full-length
handle and panel. Use this template to lay out your panel
design for finger clearance when a standard full-length
handle is used.
IMPORTANT NOTE: The weight of the framed panel must
not exceed 75 lbs (34 kg).
Framed Panel Specifications
Model WS-30
DOOR W H
Door Panel 29 3 / 4 " (756) 69 9 / 16 " (1767)
WINDOW W H
Cut-Out 23 1 / 2 " (597) 63 5 / 16 " (1608)
A
Location 3 1 / 8 " (79)
A solid panel cannot be installed over the glass door,
as this may cause moisture to form behind the panel.
W
H
A A
A
A