Sharp AR-337 - Manual (Page 98)

5-10
CHAPTER
5
Paper feed area open/close lever
3
Remove the misfed paper from the section below the exit area.
3
Close the exit area cover.
4
Open and close the front cover to cancel the misfeed
display.
If the misfed paper is in the right side of the duplex module:
1
Open the right side cover.
l Hold the handle and gently open the cover.
l If any paper is set in the bypass tray, remove the paper and close
the bypass tray before opening the right side cover.
2
Remove the misfed paper.
l Open the paper feed area open/close lever in the direction of the
arrow and remove the misfed paper.
3
Close the right side cover.
4
Open and close the front cover to cancel the misfeed
display.
l Confirm that the misfeed display is cleared.
COPIER TROUBLE?
Misfeed removal
MISFEED REMOVAL