Sharp AR-337 - Manual (Page 66)

3-32
CHAPTER
3
These functions are selected by pressing the “TEXT
STAMP” key on the SPECIAL MODES screen and then
selecting from the “TEXT STAMP” menu.
● These functions will not work when non-standard size
paper is used.
● Multiple text stamp functions can be selected at the
same time except for SELECT STAMP and
WATERMARK. These functions cannot be selected
together.
● If the printed text stamp is located on the copy image,
part of the copy image will be covered except for
watermark. Part of watermark may be covered with
the copy image.
● The size of printed characters is fixed.
The size will not vary even in reduction or enlargement
copying.
TEXT STAMP
The text stamp functions include the following functions.
● Date: Adds the current date to the copies.
● Select stamp: Adds a selected stamp to the copies.
The stamp will be printed in white on a shaded
background.
● Watermark: Adds a selected watermark to the copies.
The watermark will be printed in gray tone.
● Page number: Adds page numbers to the copies.
The DATE function adds the current date to the copies. The date will be
printed at the upper right of the copies.
● If reduction or enlargement is used with this function, the print
position may move or the date may not be printed.
★ KEY OPERATOR To use the DATE function, set the current date and
time. See page 19 of the KEY OPERATIOR’S GUIDE. The initial setting
of the date format can be changed. See page 18 of the KEY OPERATOR’S
GUIDE.
1 Place the originals in the document feeder tray or on the
document glass.
2 Press the SPECIAL MODES key.
● The SPECIAL MODES screen will appear.
DATE
READY TO CO
SPECIAL FUNCTIONS
Text stamp
March 23, 2000