Sharp AR-337 - Manual (Page 60)

3-26
CHAPTER
3
SPECIAL FUNCTIONS
Image editing functions
IMAGE EDITING FUNCTIONS
7 Select a type of border line.
● Select the solid line, broken line or no border line.
8 Press the upper “OK” key.
9 Make all other desired copier selections and enter the
desired number of copies.
● If the required area of the originals is not included on the copies,
select a proper reduction ratio.
10 Press the START key.
● If the document feeder is used, scanning of originals and copying
will start.
● If the document glass is used in the SORT mode, proceed to the
next step.
11 Replace the finished original with the next original after
the START key indicator lights up, and then press the
START key. Repeat this step until all originals have been
scanned. Then, press the “READ-END” key on the touch
panel.
● Copying will start at this time.
● Up to 120 sheets of 8-1/2" x 11" originals or up to 60 sheets of
originals larger than 8-1/2" x 11" can be scanned.
● To cancel the REPEAT COPY function, select the REPEAT
COPY function again and press the “CANCEL” key.
4
16
BORDER LINE
CANCEL OK
4
16
BORDER LINE
CANCEL OK
OK
1 2 3
4 5 6
7 8 9
0
C
P
CLEAR
PROGRAM AUDIT CLEAR
INTERRUPT
C
CLEAR
INTERRUPT
CA
CLEAR ALL
START
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO IMAGE
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
11 17