Sharp AR-337 - Manual (Page 54)

3-20
CHAPTER
3
SPECIAL FUNCTIONS
Image editing functions
IMAGE EDITING FUNCTIONS
The JOB BUILD function allows copying of multipage documents containing
up to 120 pages (the limit, however, might be up to 60 pages of 8-1/2" x 14"
or 11" x 17" paper size when the copier is equipped with some option) using
the RADF. The original must be divided into sections of up to 50 pages per
section. Each section can be fed separately through the RADF for eventual
copying into a complete set(s).
● Once a copy job is set in this mode, the copy mode can not be changed
between the simplex and duplex modes except for INTERRUPT copying.
● When the JOB BUILD function is selected, the below mentioned functions
can not be selected simultaneously. GROUP MODE/TRANSPARENCY
INSERTS/DUAL PAGE COPY/REPEAT COPY.
● The JOB BUILD mode has priority over the stream feeding mode.
Stream feeding will not operate while the JOB BUILD mode is selected.
The illustration shows an example when copying 120 pages of original.
1 Divide the multipage document (maximum 120 pages)
into sections of 50 pages or less and place the section
containing the first page of the document into the
document feeder tray.
2 If a duplex copy mode is required, it must be selected at
this time by pressing the 2-SIDED COPY key.
JOB BUILD
IMAGE EDITING FUNCTIONS
The image editing functions include the following functions.
● Job build: Makes copies from a large volume of originals (up to 120
pages) using the document feeder.
● Centering: Shifts the image to the center of copy paper when the
original and the copy paper are of different sizes.
● Repeat copy: Produces repeated copies on a single sheet of copy
paper.
● B/W reverse: Reverses the black and white areas.
● Binding change: Rotates the image of originals for the second side
in the 1-sided to 2-sided copy mode.
These functions are selected by pressing the “IMAGE EDIT” key on
the SPECIAL MODES screen and pressing the key of each function.
b c
20 sheets
1 page
a
21 page 71 page
50 sheets
Original
50 sheets
AUTO
Divide the original containing more than
50 pages into some sections as shown
above and feed them in the order of c
b
a. The original should be less than
120 pages in total. If the total page
exceeds 120 (if the above section “a”
exceeds 20 pages), the pages in excess
of the limit will be output to the exit area
without being copied.