Sharp AR-337 - Manual (Page 134)

7-22
CHAPTER
7
Staple sort
The STAPLE SORT mode staples 8-1/2" x 11" size copies. Stapled
sets cannot be delivered to the top tray.
NOTE:
Different size originals cannot be copied onto copy paper of their
respective sizes in the STAPLE SORT mode. Only 8-1/2" x 11" size
paper can be selected in the STAPLE SORT mode.
Using the RADF
1 Set the originals in the document feeder tray.
● If the number of copies in one set is more than 30, the copies
will not be stapled.
● If the orientation of the originals does not match that of the copy
paper, the images of the originals will be rotated. The stapling
position in this case is shown below.
● If originals in the landscape orientation are copied, the copies
will be stapled at an improper position.
2 Press the OUTPUT key.
3 Press the “STAPLE SORT” key on the touch panel.
Stapling position
AUTO
EXPOSURE
READY TO COPY.(DOCUMENT FEEDER MODE)
OUTPUT
TOP TRAY
SORT OFFSET
TRAY
STAPLE
SORT GROUP
OK
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO 8/ 11 1
2
OPTIONAL EQUIPMENT
Finisher (AR-FN2)
FINISHER (AR-FN2)