Sharp AR-337 - Manual (Page 88)

4-8
CHAPTER
4
SUPPLIES
Storage of supplies
GENUINE SUPPLIES
STORAGE OF SUPPLIES
The supplies of this copier replaced by the user include copy paper,
toner, toner collecting container, and staple cartridges for the optional
finishers (AR-FN1N, AR-FN2). For best copying results, be sure to use
only Sharp Genuine Supplies which are
designed, engineered, and tested to
maximize the life and performance of
Sharp copiers. Look for the Genuine
Supplies label on the toner package.
Photoconductive drum
The AR-287/AR-337/AR-407 Copiers have advanced process control
technology which improves copy quality uniformity. This feature
stabilizes copy quality throughout the life of the photoconductive
drum by automatically compensating for the changes in drum charac-
teristics due to wear, operator use patterns, and environmental
conditions. The automatic adjustments are made in response to a
sensor that detects the reflectance characteristics of the drum.
WARNING
This feature requires drums containing the special reflectance area
(recommended Sharp genuine photoconductive drum), to prevent
low image density copies from poor process control and possible
damage to the machine. If you use other drums, the process control
system cannot run properly.
Proper storage
1 Store the supplies in a location that is:
● clean and dry,
● at a stable temperature,
● not exposed to direct sunlight.
2 Store copy paper in the wrapper and lying flat.
● Paper stored in packages standing up or out of the wrapper may
curl or become damp, resulting in paper misfeeds.