Sharp AR-337 - Manual (Page 39)

3-5
CHAPTER
3
SPECIAL FUNCTIONS
Margin shift
MARGIN SHIFT
3 Press the “MARGIN SHIFT” key on the touch panel.
● The setting screen for MARGIN SHIFT will appear.
4 Select the shift direction.
● Select “RIGHT”, “LEFT”, “DOWN” or “UP” on the touch panel.
The selected shift direction will be highlighted.
5 Select the desired shift amounts using the and
keys.
6 Press the upper “OK” key on the touch panel.
7 Make all other desired copier selections and press the
START key.
● If the document feeder is used, scanning of originals and copying
will start.
● If the document glass is used in the SORT mode, proceed to the
next step.
8 Replace the finished original with the next original after
the START key indicator lights up, and then press the
START key. Repeat this step until all originals have been
scanned. Then, press the “READ-END” key on the touch
panel.
● Copying will start at this time.
● Up to 120 sheets of 8-1/2" x 11" originals or up to 60 sheets of
originals larger than 8-1/2" x 11" can be scanned.
● To cancel the MARGIN SHIFT function, select the MARGIN
SHIFT function again and press the “CANCEL” key.
READY TO COPY.
MARGIN SHIFT CANCEL
SIDE 1 SIDE 2
1/2 1/2
RIGHT LEFT
OK
OK
DOWN UP (0~1)
inch
(0~1)
inch
MARGIN SHIFT CANCEL
SIDE 1
1/2
RIGHT LEFT
DOWN UP (0~1)
inch
SIDE 1
1/2
RIGHT LEFT
DOWN UP (0~1)
inch
SIDE 2
OK
OK
CA
CLEAR ALL
START
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT
MULTI SHOT
PAMPHLET COPY
ERASE
COVERS
IMAGE EDIT TEXT STAMP
TRANSPARENCY
INSERTS
DUAL PAGE
COPY
OK
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO 8/ 11 1
2
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
READ-END
PLACE NEXT ORIGINAL. PRESS [START].
WHEN FINISHED, PRESS [READ-END].
AUTO 8/ 11 1
2