Sharp AR-337 - Manual (Page 40)

3-6
CHAPTER
3
This copier has an edge erase mode and a center erase mode.
● Edge erase can be used to eliminate shadow lines around the edges of
copies caused when thick paper or a book is used as an original.
● Center erase can be used to eliminate the shadow produced by the
bindings of bound documents.
● Edge + center erase can be used to eliminate shadow lines around the
edges of copies and to eliminate the shadow at the center of copies.
● The standard erase width is 1/2", but can be changed from 0" to 1" in
1/8" increments.
★ KEY OPERATOR The initial setting of the width for edge erase and center
erase can be changed. See page 16 of the KEY OPERATOR’S GUIDE.
SPECIAL FUNCTIONS
Erase
ERASE
A B A B
A A
A B A B
Edge erase
Center erase
1 Place the original in the document feeder tray or on the
document glass.
2 Press the SPECIAL MODES key.
● The SPECIAL MODES screen will appear.
3 Press the “ERASE” key on the touch panel.
● The setting screen for ERASE will appear.
READY TO COPY.
ERASE
EDGE ERASE
CENTER ERASE
EDGE+CENTER
ERASE
CANCEL
1/2
OK
OK
(0~1)
inch
READY TO CO
READY TO COPY.
SPECIAL MODES
MARGIN SHIFT
MULTI SHOT
PAMPHLET COPY
ERASE
COVERS
IMAGE EDIT TEXT STAMP
TRANSPARENCY
INSERTS
DUAL PAGE
COPY
OK
AUTO
EXPOSURE PAPER SELECT
100%
COPY RATIO
AUTO 8/ 11 1
2
Edge + center erase