Sony RS-232C - Manual (Page 30)

– 30 –
• Index (2-9th byte)
This command is used to specify index of the input channels with 8 bytes of the ASCII code.
Caution
If number of index characters does not reach the 8 bytes, be sure to fill the blanks with the space (20[H]).
• MIC INPUT fader (10th byte)
This command is used to set the MIC1/WL1 to MIC6/LINE2 channels’ assign to the GROUP FADER with the 8-bit data.
Set 1 to implement assign. Set 0 not to implement assign.
Bit-6 and bit-7 are fixed all the time.
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
0 1 MIC6/ MIC5/ MIC4 MIC3 MIC2/ MIC1/
LINE2 LINE1 WL2 WL1
• LINE INPUT fader (11th byte)
This command is used to set the LINE3 and 4 channels’ assign to the GROUP FADER with the 8-bit data.
Set 1 to implement assign. Set 0 not to implement assign.
Bit-2 to bit-7 are fixed all the time.
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
0 1 0 0 0 0 LINE4 LINE3
• LINE OUTPUT1-6 fader (12th byte)
This command is used to set the LINE OUTPUT1 to 6 channels’ assign to the GROUP FADER with the 8-bit data.
Set 1 to implement assign. Set 0 not to implement assign.
Bit-6 and bit-7 are fixed all the time.
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
0 1 LINE LINE LINE LINE LINE LINE
OUTPUT6 OUTPUT5 OUTPUT4 OUTPUT3 OUTPUT2 OUTPUT1
• LINE OUTPUT7,8 fader (13th byte)
This command is used to set the LINE OUTPUT7 and 8 channels’ assign to the GROUP FADER with the 8-bit data.
Set 1 to implement assign. Set 0 not to implement assign.
Bit-2 to bit-7 are fixed all the time.
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
0 1 0 0 0 0 LINE LINE
OUTPUT8 OUTPUT7
Caution
Do no assign the INPUT fader and the OUTPUT fader to the GROUP FADER of the same channel.
Example: When setting the MASTER A as shown below.
Index : MIC
MIC INPUT fader : Assign the MIC1/WL1 through MIC4.
: MIC5/LINE1 and MIC6/LINE2 are not assigned.
LINE INPUT fader : LINE 3 and 4 INPUTs are not assigned.
LINE OUTPUT1-6 fader : LINE OUTPUT1 through 6 are not assigned.
LINE OUTPUT7,8 fader : LINE OUTPUT7 and 8 are not assigned.
43[H] 47[H] 46[H] 41[H] 30[H] 4D[H] 49[H] 43[H] 20[H] 20[H] 20[H] 20[H] 20[H] 4F[H] 40[H] 40[H] 40[H] 0D[H]
(‘ C G F A M I C s s s s s O @ @ @ CR’)
“s” indicates the space.