Sony RS-232C - Manual (Page 26)

– 26 –
• LINE OUTPUT 1-6 ON/OFF (13th byte)
This command is used to turn ON/OFF the automatic mixer according to the output channels.
When you want to turn it ON, set the corresponding bit to 1. When you want to turn it OFF, set the corresponding bit to 0. Bit-6 and bit-7
are fixed all the time.
MSB LSB
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
0 1 OUT6 OUT5 OUT4 OUT3 OUT2 OUT1
• LINE OUTPUT 7,8, RECOUT 1,2 ON/OFF (14th byte)
This command is used to turn ON/OFF the automatic mixer according to the output channels.
When you want to turn it ON, set the corresponding bit to 1. When you want to turn it OFF, set the corresponding bit to 0. Bit-4 to bit-7
are fixed all the time.
MSB LSB
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
0 1 0 0 REC2 REC1 OUT8 OUT7
Example: When setting the respective parameters as shown below.
INPUT COMPRESSOR THRESHOLD : –3 dB
INPUT COMPRESSOR RATIO : 4:1
INPUT COMPRESSOR ATTACK TIME : 33 ms
INPUT COMPRESSOR RELEASE TIME : 100 ms
INPUT GATE THRESHOLD : –25 dB
INPUT GATE HOLD TIME : 1000 ms
INPUT GATE RELEASE TIME : 470 ms
OUTPUT LIMITER THRESHOLD : 10dB
OUTPUT LIMITER ATTACK TIME : 0.47 ms
OUTPUT LIMITER RELEASE TIME : 100 ms
FUNCTION ON/OFF : Set DEFAULT/EDIT to EDIT, turn on NOM, and turn off ONLY ONE and
LAST ON.
MIC INPUT ON/OFF : Turn on MIC 1-4, and turn off MIC 5, 6.
LINE OUTPUT1-6 ON/OFF : Turn on LINE OUTPUT1-4, and turn off LINE OUTPUT5, 6.
LINE OUTPUT7-8, REC OUT 1,2 ON/OFF : Turn on LINE OUTPUT7, 8, and turn off REC OUT1, 2.
43[H] 41[H] 4D[H] 50[H] 59[H] 37[H] 3E[H] 41[H] 43[H] 47[H] 45[H] 66[H] 34[H] 41[H] 4C[H] 4F[H] 4F[H] 43[H] 0D[H]
('C A M P Y 7 > A C G E f 4 A L O O C CR')