Motorola i2000 - Manual (Page 35)

Using Your Phone’s Features 35 English
Using Your Phone’s Features
Phone Setup
Using VibraCall ™
VibraCall is a vibration alert system that notifies you of incoming
Messages and Phone Calls. You can set a vibration alert for either
both these services or for one service only.
The alert choices for VibraCall are as follows:
• Vibe All—produces a vibration alert for all incoming calls and
messages.
• Phone Vibrate—produces a vibration alert for incoming
phone calls.
• Phone Vibrate/Ring—produces a vibration alert followed by
a ring tone for phone calls.
• Mail Vibe—produces a vibration alert for mail messages.
AIf VibraCall is set for incoming calls and messages, the
power-up sequence includes a brief vibrate cycle.
Selecting VibraCall for All Incoming Calls and
Messages
To set a vibration alert for all incoming calls and messages, press
² once; a VibeAll: On message displays briefly.
After you set the alert, the display returns to the previous mode
and
g (the Vibrate All icon) appears at the top of your display.
Selecting VibraCall for Individual Services
To set a vibration alert for specific phone or mail services:
1 From the Phone Ready screen, press $ until you see the
Prgm menu option.
2 Select Prgm.
3 Press 9.
4 Press $ until you see the Selct menu option.
5 Select Selct. The first choice is Phone Vibrate.
6 To view the Vibe/Ring vibration alert choices, press
$ on
the keypad.
7 To view other choices, press ´.
• To receive vibration alerts only for Mail, select Mail Vibe,
then select On.
8 Select Exit to return to the Vibrate Alert menu.
9 Select Exit again to return to the phone ready mode.
Phone Lock
You may lock the i2000 keypad to prevent inadvertent key
presses which result in digits being dialled or a phone call being
placed. Press
* and # simultaneously to activate the phone
lock. While the phone is locked, the only keys you may press are
the Power Key (to turn off your phone) or the
* followed by
the # keys to turn off the phone lock. The phone lock will be
automatically disabled if the i2000 receives a Phone call. At the
end of the call, the keypad lock will be automatically re-activated.
AYou can not place Emergency calls while the keypad is
locked.
i2000_en.bk : opt_menu.fm5 Page 35 Wednesday, February 23, 2000 7:58 AM