Motorola i2000 - Manual (Page 28)

Making and Receiving Phone Calls 28 English
Conditional Call Diverting
You may want to divert your calls when your i2000 is:
• Busy on another call
• Not answered (NoAns)
• Outside the service area (NoRch).
AYou must turn off Unconditional Call Diverting before you
can set Conditional Call Diverting options.
1 From the Phone Ready screen, press $ until you see Divrt
on the last line of your display, then select it.
2 Press $ once again until you see Busy and NoAns on the
last line of your display.
• To divert your calls when your phone is in use, select Busy.
• To divert your calls when you do not want to answer them,
select NoAns.
3 Press $ again until you see NoRch and Rcl#.
• To divert your calls when you can not be reached, select
NoRch.
• To see the call divert number, select Rcl#.
4 After you select the call divert option, either enter the number
where you want your calls to be diverted, or press the scroll
buttons and then select a number.
5 Select On
6 Select Exit.
AYou can set more than one condition by repeating steps 2
through 6.
Call Waiting
Using the Call Waiting feature, you can answer an incoming call
when you are on another call. Call Waiting is on unless you turn
it off for a particular call.
1 After the alert tone, your display shows the incoming number
and asks Accept Call? (if you have Caller ID). To accept
the call, select Yes. To decline the call, select No.
2 Press $, then select Hold to place the second call on hold
and return to the first call. Selecting Hold switches you
between the two calls.
3 To end the active call, press °.
Call Hold
When you are on a call, you can place the call on hold and make
a second call.
1 To place the active call on hold, press $, then select Hold.
You may then answer or place another call.
2 To remove the call from hold, press $, then select Hold
again.
AThe options 3way and Spkr appear only when you are on
an active call.
i2000_en.bk : usephone.fm5 Page 28 Wednesday, February 23, 2000 7:58 AM