Motorola i2000 - Manual (Page 22)

Making and Receiving Phone Calls 22 English
SIM Card PIN
To prevent unauthorised use of your phone, you may set a SIM
card PIN. After you set the PIN, you will need to enter the PIN
each time you switch on the i2000. After you set a PIN, you can
later change or disable it.
If your i2000 requires a SIM PIN, follow the steps described in
Entering the PIN.
If your i2000 does not require a PIN and you want to set one,
follow the steps described in Enabling the PIN Requirement.
Entering the PIN
AAs you enter PIN and PUK (PIN unblock) numbers,
remember that pressing and holding the 9 key dials the
emergency number.
1 Enter your PIN. As you enter it, an asterisk appears for each
character. This prevents others from seeing your PIN.
If you enter an incorrect PIN, the message, Wrong PIN
appears. After three incorrect attempts, even if you turn off
the phone and turn it on again, the SIM card PIN is blocked. If
this happens, see Unblocking the PIN.
2 Select Ok. Now you are ready to place calls or check your mail.
You can disable the PIN entry requirement. For more information,
see Disabling the PIN Requirement.
Unblocking the PIN
If you forget your PIN and try, unsuccessfully, to enter it three
times, access to your i2000 with that SIM will be blocked. To gain
access, you must first unblock the PIN.
To unblock the PIN:
1 Call your Service Provider for your PUK (PIN unblock code).
2 At the Enter PUK screen, enter your PIN Unblocking Key
(PUK). As you enter it, an asterisk appears for each character.
This prevents others from seeing your PUK.
3 Select Ok.
4 At the New PIN screen, enter a new PIN.
5 Select Ok.
6 At the Repeat New PIN screen, enter the new PIN again.
7 Select Ok. After the system validates your new PIN, your
phone is ready for normal use.
AIf you unsuccessfully enter the PUK number ten times, the
PUK is blocked. If this happens, you will get a message to
call your Service Provider.
You may, however, make emergency calls.
Changing the PIN
To change your SIM card PIN:
1 From the Phone Ready screen, press $ once until you
see the Prgm menu option.
2 Select Prgm.
3 Press
4,6.
4 Select Ok. At the Change PIN? screen, select Ok.
5 At the Old PIN screen, enter your current PIN then select Ok.
6 At the New PIN screen, enter your new PIN then select Ok.
7 At the Repeat New PIN screen, enter your new PIN again
then select Ok.
i2000_en.bk : usephone.fm5 Page 22 Wednesday, February 23, 2000 7:58 AM