beautypg.com

Motorola Timeport 250 User Manual

Page 73

background image

Using the Options Menu 69

English

A Talk and Fax call automatically switches to fax mode when you
start sending the fax. While the fax is being transmitted, the
message

Fax In Progress will be displayed. The call automatically

ends when the fax transmission is complete. You cannot switch
back to voice mode in the same call.
AWhile a Talk and Fax call is active, any incoming call and

services like Call Waiting and Call Holding are suspended.

If you receive a Talk and Fax call when:

Your phone is not fax-ready - you can only talk.

Your phone is fax-ready but Talk and Fax mode is off - the call

is automatically routed to your fax (you cannot talk).

On

Switches Talk and Fax mode on for the next and all subsequent
calls.

Off

Switches Talk and Fax mode off for the next and all subsequent
calls.
AWhen you deactivate the Talk and Fax call, power off and

on your phone in order to resume any incoming call and
services like Call Waiting and Call Holding.

j Call Waiting

The Call Waiting menu item has two settings

On or Off. If you

select

Off, you will be not be notified of waiting calls. The person

trying to contact you will either receive the busy tone, or be
diverted by the ‘

Detailed Diverting - If Busy’ option.

If Call Waiting is

On, you will be notified of a waiting call by an

audible alert and by the message

Call Waiting - Answer?. You can

press the

O key to accept the waiting call, or use the $ and

then the

ª key to scroll to an alternative option and then

press

O.

AIf you have Caller Line Identification, the caller’s number or

name is displayed instead of the Call Waiting message.

AAvailability of this feature depends on your service provider.

j Call Barring

Call barring is a network feature which can be used to selectively
bar outgoing and incoming calls.

If you change the barring setting, you may be asked to enter your
barring password. There will be a short delay while the phone
notifies the network of the new setting. When the change has
been made by the network, the phone will display a confirmation
message.

The initial password will be supplied to you by your Cellular
Service Provider when you subscribe to this service.
AThis option may be affected by the Fixed Dialling setting.

Bar Outgoing Calls

After selecting this option, there will be a short delay while the
phone asks the network for the current setting.

Int'l Calls
When selected, this option will bar outgoing international calls.

jade_en.bk : opt_menu.fm5 Page 69 Wednesday, October 11, 2000 9:58 PM