Motorola Timeport 250 - Manual (Page 22)

About Your Phone, Battery and SIM Card 18 English
Volume Button
The Volume button is on the left-hand side of your
phone, above the Smart button. The button is used for
adjusting the keypad, earpiece and ringer volume. A
volume meter will display the current volume setting. The
meter will disappear after a short time, or if you press
O or C.
• To adjust the keypad and earpiece volume, press the button
with no other features selected.
• To adjust the ringer volume, first select the ‘Adjust Ring
Volume’ option in the Phone Setup Menu and then use the
button to set the required volume.
AIf you receive a call and you do not want to answer it
immediately, you can press the volume button to stop the
phone from ringing or vibrating. This will not answer the
call.
Automatic Volume Control
If you have set the earpiece volume to maximum and the phone
detects a high level of background noise, the earpiece volume
automatically increases by an additional two steps.
When the level of background noise returns to normal, the
earpiece volume automatically returns to the normal maximum.
The Start/Stop Record Button
The Start/Stop Record button ( ?) is on the top
of your phone. Press it to start and stop
recording VoiceNotes™. Refer to Using
VoiceNotes™, for more information.
The Display
The display on your phone can
show alphanumeric characters as
well as useful information
symbols.The various elements of
the display are as follows:
ABC123 Characters are used to display messages and
telephone numbers.
rx Signal Strength. The more segments displayed in
the bar graph, the better the signal strength.
h Ringer On/Off. Displayed when the call ringer is
selected. If you select the
No Ring Or Vibrate or
the Vibrate Only options this symbol will not be
displayed.
L Vibrate On/Off. VibraCall™ will be switched
either on or off depending on the current setting.
jade_en.bk : abtphone.fm5 Page 18 Wednesday, October 11, 2000 9:58 PM