Motorola Timeport 250 - Manual (Page 30)

About Your Phone, Battery and SIM Card 26 English
SIM Card Insertion/Removal
1 Switch off your phone by pressing and
holding the S key, remove the
battery cover and the battery.
2 Press slightly at the edge of the lever
marked “PRESS”.
3 Slide the SIM card into the slot in
direction as indicated on the SIM card
holder.
4 The SIM card stays in the holder such
that the notch is in the bottom right-
hand corner
5 Replace the battery and battery cover.
6 To remove, press the lever inward and
gently push the card up.
If the SIM card is inserted the wrong way round, or damaged, the
Check Card message may be displayed. Remove the SIM card,
check that it is the right way round and then re-insert it into the
phone.
! To avoid damage and malfunctioning, do not
deliberately pull or pry open the strips on the SIM card
holder.
If either of the Bad Card See Supplier or Blocked See Supplier
messages are displayed, then you will need to contact your
Cellular Service Provider.
jade_en.bk : abtphone.fm5 Page 26 Wednesday, October 11, 2000 9:58 PM