Motorola Timeport 250 - Manual (Page 47)

Using Voice Features 43 English
Using Voice Activation with Quick Access Features
To activate a Quick Access feature using Voice Activation:
1 Press E.
If there is a Quick Access feature with a Voice Tag, the following
prompt appears:
2 Say Name After Tone...
Wait for the tone to finish and then say the name. For best
results, use in an area with minimal wind or background
noise.
AAt this point, you can press C to return to the idle
screen; press a numeric key or O to activate the
appropriate Quick Access feature; push up or pull down
ª to display the Quick Access menu list.
If the phone does not find a matching Voice Tag, No Match
Found appears and you return to the Quick Access menu.
3 If the name you say matches a Voice Tag, the phone repeats
the name and displays the entry for the Quick Access feature.
4 Do one of the following:
• Wait for two seconds and the phone activates the feature.
• Press O to activate the feature or C to return to the idle
screen.
• Pull ª down to display the next entry in the Quick Access
menu.
When you scroll to a Quick Access feature that has a Voice Tag,
your phone replays the Voice Tag through the speaker.
jade_en.bk : voice.fm5 Page 43 Wednesday, October 11, 2000 9:58 PM