Motorola Timeport 250 - Manual (Page 31)

Making and Receiving Phone Calls 27 English
Making and Receiving Phone Calls
Switching the Phone On and Off
To switch the phone on or off, press and hold the S key. If
VibraCall™ is selected, the phone will vibrate when it is switched
on.
If you switch the phone on and there is no SIM card inserted, you
will be asked to insert one. Once inserted, the phone will check
that the SIM card is valid.
A number of messages will then be displayed:
• Enter PIN - a request to enter the SIM card PIN code (if
required).
• Enter Phone Unlock Code - a request to enter the phone unlock
code (if required).
• Searching... followed by a network name - as the phone
searches and then finds a suitable network to connect to.
Once switched on and connected, the phone stays in idle mode.
Entering Your SIM Card PIN Code
To enter the PIN code, enter AO.
As you type in each digit of the PIN code a * character will be
displayed.
If you make a mistake, press and release the C key to remove
the last digit. Holding the C key down will remove the entire
entry.
When the PIN code is complete press the O key.
If the PIN code entered is incorrect, the warning message Wrong
PIN will be displayed, followed by Enter PIN.
! If the PIN number is entered incorrectly three times in a
row, your phone will automatically lock-up and the
Blocked message will be displayed. See ‘Unblocking Your
Phone’ for details on unblocking your phone.
The PIN code can be changed, see ‘Change SIM PIN Code’ in the
Phone Setup Menu section for more details.
j Entering Your Unlock Code
If your phone displays the message Enter Phone Unlock Code you
must enter your unlocking code by entering BO.
The unlock code is a four digit number which is set at
manufacture to 1234. The code can be changed, see ‘Change
Unlock Code’ in the Phone Setup Menu section for more
details.
If you forget your unlock code, press the $ key. This will
display the ‘Change Unlock Code’ option. Enter O
D, enter a new unlock code, and press O.
Locking the Keypad
Press the < and > keys simultaneously to prevent
accidental usage of the phone. To remove the lock, press <
and > simultaneously. All keys with the exception of the S
key will be disabled. You can still answer an incoming call by
pressing
O when the keypad is locked.
jade_en.bk : usephone.fm5 Page 27 Wednesday, October 11, 2000 9:58 PM