Sony PDW-1500 - Manual (Page 62)

Ch
apt
er 6
Men
u
s
62
6-3 Extended Menu
Menu items in the 400s, relating to preroll
Item number Item name Settings
401 FUNCTION MODE AFTER CUE-UP Select the state that the unit goes into after a cuing-up operation.
stop: Stops (the STOP mode).
still: Still playback (in search mode).
Menu items in the 600s, relating to the time code and metadata
Item number Item name Settings
601 VITC POSITION SEL-1 Select a line to insert the VITC in.
12H ... 16H ... 20H (in 525(U)/525(J)-line modes): Select any line from
12 to 20.
9H ... 19H ... 22H (in 625-line mode): Select any line from 9 to 22.
Note
You can insert the VITC signal in two places. To insert it in two places, set
both items 601 and 602.
602 VITC POSITION SEL-2 Select a line to insert the VITC in.
12H ... 18H ... 20H (in 525(U)/525(J)-line modes): Select any line from
12 to 20.
9H ... 21H ... 22H (in 625-line mode): Select any line from 9 to 22.
Note
You can insert the VITC signal in two places. To insert it in two places, set
both items 601 and 602.
605 TCG REGEN MODE Select the signal to be regenerated when the time code generator is in
the regeneration mode (i.e., when “int regen,” “ext regen” or “rp 188
regen” is selected in menu item 626).
TC&UB: Both the time code and user bits are regenerated.
TC: Only the time code is regenerated.
UB: Only the user bits are regenerated.
607 U-BIT BINARY GROUP FLAG Select the user bits to be used in the time code generated by the time
code generator.
000: Character set not specified.
001: 8-bit characters compliant with ISO 646 and ISO 2022.
010: Undefined.
011: Undefined.
100: Undefined.
101: SMPTE 262M page/line multiplex system.
110: Undefined.
111: Undefined.
611 TC OUTPUT PHASE IN EE MODE Select the time code output mode for output from the TIME CODE OUT
connector in E-E mode.
mute: Mute the output.
thru: Output the time code input to the TIME CODE IN connector as it is.
v-in: Output the time code with the same phase as the input video signal
phase.
v-out: Output the time code with the same phase as the output video
signal phase.
612 TC OUTPUT MUTE IN SEARCH
MODE Select whether to mute the output from the TIME CODE OUT connector
in jog/shuttle mode.
on: Mute.
off: Do not mute.
619 VITC Specify whether or not to record the VITC generated by the internal time
code generator.
off: Do not record internally generated VITC.
on: Record internally generated VITC.