Sony PDW-1500 User Manual

Page 60

Ch
apt

er 6

Men

6-3 Extended Menu

131

AUDIO VOLUME

Select whether each of the ALL/CH-1, CH-2 to CH-4 adjustment knobs
on the control panel is effective to control the audio recording level and
playback level on each channel or the ALL/CH-1 adjustment knob alone
functions as a master control to control the audio level on all channels
together.
each: Each of the ALL/CH-1, CH-2 to CH-4 adjustment knobs is effective

to control each channel.

all: The ALL/CH-1 adjustment knob alone functions as a master control.

When “all” is selected, the ALL indicator to the right of the ALL/CH-1
adjustment knob lights up.

Menu items in the 100s, relating to the control panels

Item number Item name

Settings

Menu items in the 200s, relating to the remote control interface

Item number

Item name

Settings

214

REMOTE INTERFACE

When the remote control switch is set to REMOTE, select the device from
which to remote-control this unit.
9PIN: Device connected to the REMOTE connector.

i.LINK: Device connected to the S400 (i.LINK) connector.

Menu items in the 300s, relating to editing operations

Item number Item name

Settings

301

VAR SPEED RANGE FOR
SYNCHRONIZATION

Select the playback speed range when carrying out playback in variable
speed mode from a remote control unit connected to the REMOTE
connector.
–1~+2: –1 to +2 times normal speed.
wide: –1.15 to +2.20 times normal speed.

308

SELECTION OF STD/NON-STD
FOR COMPOSITE VIDEO IN

Select the STD or NON-STD mode in accordance with a composite
video or S-video input.
STD: The STD mode is always used (forced STD mode).
N-STD: Use this setting when the input video signal is unstable (forced

NON-STD mode).

Note

When using a VCR with no built-in time base corrector (e.g. a home-use
VHS-system VCR), select N-STD.

310

REC INHIBIT

Select whether recording is inhibited.
off: Do not inhibit recording.
on: Inhibit recording.

320

DIGITAL AUDIO PB PROCESS ON
EDIT POINT

Select the treatment of audio playback at edit points.
cut: Carry out a cut (possibly resulting in audio discontinuities at the edit

point).

fade: Fade out and fade in.

335

OUTPUT REFERENCE SEL

Select the reference signal of this unit.

ref: Use the signal input to the REF.VIDEO IN connector as the

reference signal.

auto: According to the operation mode, automatically select either the

signal input to the REF.VIDEO IN connector or the input video signal
selected with the VIDEO INPUT SEL button as the reference signal.

For more details, see the following item “External Sync Signal for the
Internal Reference Video Signal Generator.”

The input digital audio signals and video signals must be synchronized
with the reference signal input to the REF.VIDEO IN connector.