Unpacking – Siemens sl2_141 User Manual

Page 11

ADSL Router User Manual

Static routes, RFC1058 RIPv1, and RFC1723 RIPv2

DNS Relay, Dynamic DNS

DHCP Client/Relay/Server

Time protocol can be used to get current time from network time server

Support IGMP Proxy/Snoop

Support IP/Bridge QoS for prioritize the transmission of different traffic classes

Support port mapping function which allows you to assign all data traffic transmitted among
specific Internet connections and LAN ports

Security Features
³

PAP (RFC1334), CHAP (RFC1994), and MS-CHAP for PPP session

Firewall support IP packets filtering based on IP address/Port number/Protocol type

Bridge packet filtering (optional)

URL filtering (optional)

Support DoS (Deny of Services) which detect & protect a number of attacks (such as SYN/FIN/RST
Flood, Smurf, WinNuke, Echo Scan, Xmas Tree Scan, etc)

Configuration and Management
³

User-friendly embedded web configuration interface with password protection

Remote management access control via HTTP, TFTP, FTP, Telnet, SSH, SNMP

Telnet session for local or remote management

Firmware upgrades through HTTP, TFTP, or FTP

The boot loader contains very simple web page to allow the users to update the run-time
firmware image.

Configuration file backup and restore

SNMPv1/v2 agent with MIB-II, ADSL Line MIB

Unpacking

Check the contents of the package against the pack contents checklist below. If any of the items is
missing, then contact the dealer from whom the equipment was purchased.

ADSL Router

Power Adapter and Cord

RJ-11 ADSL Line Cable

RJ-45 Ethernet Cable

Quick Start Guide

Driver & Utility Software CD