Siemens CP 243-2 - Manual (Page 149)

Index
Index-1
SIMATIC NET CP 243-2 AS-i Master
C79000-G8976-C142/02
Index
A
Addressing
AS-i slaves, 3-2
example, 3-6
examples, 2-4
the CP 243-2 in the S7-200 CPU, 2-4
Analog input and output words, access to, 2-16
Analog input area, 2-18
Analog module, 2-2, 2-13
Analog output area, 2-21
AS–Interface, cycle time, A-4
AS-i.
See AS-Interface
AS-Interface
configuring with the SET button, 1-16
cycle time, 1-5
diagnostics on, 2-19
input data, 3-2
master, 1-3, 3-1
output data, 3-2
slave, replacing defective slaves, 6-2
Automatic address programming, 6-2
B
Bank selection, 2-2
Button
DISPLAY, 1-7, 1-11
SET, 1-7, 1-16
C
CE mark, C-1
Command interface, 5-2
Change_AS-i_Slave_Address, 5-26
command sequence, 5-3
description of the AS-i commands, 5-7
functions, 5-2
Get_AS-i_Slave_Status, 5-27
Get_Extended_Total_Configuration, 5-32
Get_LPF, 5-53
Get_LPS, Get_LAS, Get_LDS, Get_Flags,
5-29
master, 5-1
Read_AS-i_Slave_Diagnostic_String, 5-57
Read_AS-i_Slave_I/O, 5-52
Read_AS-i_Slave_ID, 5-48
Read_AS-i_Slave_ID_String, 5-56
Read_AS-i_Slave_ID1, 5-49
Read_AS-i_Slave_ID2, 5-51
Read_AS-i_Slave_Parameter_String, 5-55
Read_Data_and_Delta_List, 5-58
Read_Extended_Actual_Configuration, 5-21
Read_Extended_Parameter_Echo_List,
5-45
Read_Version_ID, 5-47
set_operation_mode, 5-25
store_actual_configuration, 5-20
Store_Extended_Total_Configuration, 5-37
Write_AS-i_Slave_Extended_ID1, 5-50
Write_AS-i_Slave_Parameter_String, 5-54
Write_Extended_Parameter_List, 5-43
write_parameter, 5-15
Command status, 5-11
Configuration mode, 1-14, 1-16
Connection elements, 1-7
Control byte, 2-12
Control elements, 1-7
Convection, 1-6
D
Delivered product, 1-3
Delta list, 2-19
Diagnostic signaling, 4-2
Digital module, 2-2, 2-7
Display elements, 1-7