Siemens CP 243-2 User Manual
Page 136
AS-Interface Protocol Implementation
A-2
SIMATIC NET CP 243-2 AS-i Master
C79000-G8976-C142/02
Table A-2
, continued
No.
Comment / Function implemented by /
Section
M1
Function or Call on the Host Interface
(symbolic representation)
10
Status = Store_Actual_Configuration()
X
By pressing the SET button; or with the
command
Store_actual_configuration
see Section 5.2.4
11
Status, Config =
Read_Actual_Configuration(Addr)
X
Get_Extended_Actual_Configuration / see
Section 5.2.9
12
Status = Set_LPS(List31)
X
Set_LPS / see Section 5.2.10
13
Status, List31 = Get_LPS()
X
Get_LPS, Get_LAS, Get_LDS, Get_Flags
/
see Section 5.2.16
14
Status, List31 = Get_LAS()
X
Get_LPS, Get_LAS, Get_LDS, Get_Flags
/
see Section 5.2.16
15
Status, List32 = Get_LDS()
X
Get_LPS, Get_LAS, Get_LDS, Get_Flags
/
see Section 5.2.16
16.0
Status = Get_Flags()
X
Get_LPS, Get_LAS, Get_LDS, Get_Flags
/
see Section 5.2.16
16.1
Status, Flag = Get_Flag_Config_OK()
X
Get_LPS, Get_LAS, Get_LDS, Get_Flags
/
see Section 5.2.16
16.2
Status, Flag = Get_Flag_LDS.0()
X
Get_LPS, Get_LAS, Get_LDS, Get_Flags
/
see Section 5.2.16
16.3
Status, Flag =
Get_Flag_Auto_Address_Assign()
X
Get_LPS, Get_LAS, Get_LDS, Get_Flags
/
see Section 5.2.16
16.4
Status, Flag =
Get_Flag_Auto_Prog_Available()
X
Get_LPS, Get_LAS, Get_LDS, Get_Flags
/
see Section 5.2.16
16.5
Status, Flag =
Get_Flag_Configuration_Active()
X
Get_LPS, Get_LAS, Get_LDS, Get_Flags
/
see Section 5.2.16
16.6
Status, Flag =
Get_Flag_Normal_Operation_Active()
X
Get_LPS, Get_LAS, Get_LDS, Get_Flags
/
see Section 5.2.16
16.7
Status, Flag = Get_Flag_APF()
X
Get_LPS, Get_LAS, Get_LDS, Get_Flags
/
see Section 5.2.16
16.8
Status, Flag = Get_Flag_Offline_Ready()
X
Get_LPS, Get_LAS, Get_LDS, Get_Flags
/
see Section 5.2.16
17
Status = Set_Operation_Mode(Mode)
X
By pressing the SET button; or with the
command
Set_operation_mode
see Section 5.2.13
18
Status = Set_Offline_Mode(Mode)
X
see Section 5.2.11
19
Status = Activate_Data_Exchange(Mode)
–
not implemented