Sun Microsystems 2.0 - Manual (Page 54)

A-4 SunFastEthernet Adapter 2.0 Installation and User’s Guide—July 1996
A
A.1.3 Starting the Test
1. Review the information in the control panel, which identifies the devices
that are available for testing.
Click on the device that you want to test, in this case (USER 0)
nettest .Your selection is confirmed with the display of a highlighted box
next to the device name.
2. Click on the Start button.
3. Watch the console window for messages.
4. To interrupt a test or to stop after a test is completed, click on the Stop
button.
If no problems are identified during the testing, the SunFastEthernet Adapter
card is ready for operation in your system. Click on the Quit button to exit
Sundiag.