Press the control-c keys after typing device-end, At the ok prompt, type, Press the stop-a keys to get to the ok prompt – Sun Microsystems 2.0 User Manual

Page 49

Installing SunFastEthernet Adapter 2.1 Software On Solaris 1.1.1 and 1.1.2 Systems

4-15

3. Type the following exactly as shown, spaces and quotation marks

included, pressing the Return key at the end of lines

and

4. Press the Control-C keys after typing

device-end

5. At the

prompt, type:

Your system will reset and the banner will appear.

6. Press the Stop-A keys to get to the

prompt.

7. At the

prompt, type

show-devs

to list your system devices and verify

that the name property was changed correctly.
You should see the full path of the

hme

device, excluding

SUNW,

prior to

hme

similar to the example below:

8. At the

prompt, type:

0: probe-all install-console banner

1: cd

(full path name of the hme device)

2: “ hme” nameprop

3: device-end

ok nvstore

ok reset

/iommu@f,e0000000/sbus@f,e0001000/hme@3,8c00000

ok boot

(full path name of the hme device)