Sun Microsystems 2.0 - Manual (Page 27)

Installing SunFastEthernet Adapter 2.1 Software On Solaris 2.x Systems 3-7
3
2. Edit the name_to_major file by adding an entry for the SunFastEthernet
Adapter device ( hme ).
If the major device number for the last file entry is n then use n+1 for the
hme channel major device number. As shown in the example below, if the
last entry for the major device number is 104 , use 105 for the hme device.
3. Copy the hme driver from the CD-ROM to the client’s root partition as
follows:
4. Create a hostname.hme file for the client in the /etc directory in
the client’s root partition.
Proceed to Section 3.5.3, “Booting From the Network Using Solaris 2.4” for the
client system.
# qec 103
# qe 104
# hme 105
# cp /cdrom/sunfast_2_1/2.4/SUNWhmdl/reloc/kernel/drv/hme \
/export/root//kernel/drv/hme