Sun Microsystems 2.0 - Manual (Page 44)

4-10 SunFastEthernet Adapter 2.0 Installation and User’s Guide—July 1996
4
The install script will then return you to cdm and the following display :
4.2.5 Host File Configuration
After installing the SunFastEthernet Adapter software, you must create a
hostname.hme file for its Ethernet interface. You must also create both
an IP address and a host name for its Ethernet interface in the /etc/hosts
file.
To prepare your system for the SunFastEthernet Adapter:
1. Create a /etc/hostname.hme file, where refers to the
number of each SunFastEthernet Adapter channel you plan to use. For
example, use channel
hme0 for the first card; use channel hme1 for a
second card.
• Do not create /etc/hostname.hme files for SunFastEthernet
Adapter channels you plan to leave unused. The
/etc/hostname.hme file must contain the host name for the
appropriate network interface.
•
The host name should have an IP address and should be entered in the
/etc/hosts file.
•
The host name should be different from any other hostname of any other
interface, for example:
/etc/hostname.le0 and /etc/hostname.hme0
cannot share the same host name.
----->>>>> CDM <<<<<-----
1. Select Application
2. Show Current Application
3. Install Application
4. Display Application Text File
5. Print Application Text File
6. List Applications
7. List Categories
8. Change Current Category
9. Change Current Directory
10. Show Program Environment
Please enter a number or q to quit: q