Sun Microsystems 2.0 - Manual (Page 43)

Installing SunFastEthernet Adapter 2.1 Software On Solaris 1.1.1 and 1.1.2 Systems 4-9
4
Enter y to continue. You will see the following display:
Followed by:
Note – If there are problems with the preceding procedure (moving vmunix /
rebooting), then you need to boot the old vmunix which is
vmunix.orig in
the above example. Thus, type: boot vmunix.orig .
Doing a “make depend”
/etc/config HME run successfully ....
Issuing make ...
(deleted for brevity)
loading vmunix
rearranging symbols
text data bss dec hex
1572864 467712 209448 2250024 225528
’make’ ran successfully ....
***************************************************************
The SunFastEthernet 2.1 driver has been
successfully installed.
To use the new kernel, do the following:
# cd /
# mv vmunix vmunix.orig
# mv vmunix.hme vmunix
# (Please be sure to create /etc/hostname.hme entries
# /etc/reboot
***************************************************************