Sun Microsystems Sun Fire X4100 M2 - Manual (Page 33)

Chapter 2 Setting Up the Server Software 25
FIGURE 2-2 Opening a Session With an SSH Command-Line Interface
■ To establish a connection to the ILOM SP web GUI, type the IP address of the
ILOM SP in the browser locator box and press Enter.
For example, if the IP address for your ILOM SP was 129.144.02.20, you would
enter it as shown in
FIGURE 2-3 . The first GUI page prompts you for the default
username, root, and the default password, changeme.
FIGURE 2-3 Opening a Session With a Web GUI
5. After you have entered the user name and password in either the CLI or GUI, you
can use the interface to configure your ILOM SP.
For detailed instructions on configuring your system, see the Integrated Lights-Out
Manager Administration Guide, 819-1160.
6. Continue with “Setting Up Platform Operating System and Driver Software” on
page 29 .