Sharp UX-340LM - Manual (Page 89)

Timer Operations
87
8. S
pec
ia
l
Func
ti
ons
RESOLUTION
9
Adjust the resolution and/or
contrast if desired (skip to the next
step if you don't want to change
settings).
START/MEMORY
STOP
10
Press the START/MEMORY key
and then the STOP key. If this is a
transmission operation, load the
document in the feeder sometime
before the specified time of
transmission.
To cancel a timer operation
If you need to cancel a timer
operation after it has been set, follow
the steps below.
1
Press these keys:
TIMER MODE
FUNCTION
1
2
Press # to cancel a transmission
operation, or
*
to cancel a polling
operation.
3
Press 2 to select CLEAR.
2
or
POLLING SEND
4
Press the START/MEMORY key
and then the STOP key.
START/MEMORY
STOP
all_ux340lm.book Page 87 Tuesday, November 28, 2000 3:09 PM