Sharp UX-340LM - Manual (Page 57)

Using TEL Mode
55
4. Rec
e
iv
ing
Doc
u
ments
Answering with the fax’s
handset
1
When the fax machine rings, pick
up the handset.
2
If you hear a fax tone, wait until the
display shows RECEIVING and
then replace the handset.
Using TEL Mode
FAX TEL
A.M.
When the reception mode is set to TEL, you must answer all calls by picking up the
fax machine’s handset or an extension phone connected to the same line.
Beep
To select TEL mode, press the
RECEPTION MODE key until the
arrow in the display points to TEL.
Note: If you have set the Fax Signal
Receive setting to NO, press the
START/MEMORY key to begin
reception.
RECEIVING
RECEPTION
MODE
3
If the other party first speaks with
you and then wants to send a fax,
press the START/MEMORY key
after speaking. (Press your START/
MEMORY key before the sender
presses their Start key.)
•
When RECEIVING appears in the
display, hang up.
RECEIVING
START/MEMORY
all_ux340lm.book Page 55 Tuesday, November 28, 2000 3:09 PM