Sharp UX-340LM - Manual (Page 65)

63
6. M
a
k
ing
Phone Cal
ls
6. Making Telephone Calls
Your fax machine can be used like a regular telephone to make and receive voice
calls.
♦
To make or receive a voice call, the power must be on.
1
Pick up the handset or press the
SPEAKER key. Listen for the dial
tone.
2
Dial the number using one of the
following methods:
♦
Normal Dialing: Enter the full
telephone number with the numeric
keys.
♦
Rapid Key Dialing: Press the
appropriate Rapid Key.
♦
Speed Dialing: Press the SPEED
DIAL key, and enter the 2-digit
Speed Dial number with the
numeric keys.
or
Example: Press
Rapid Key 01
SPEAKER
01
3
Speak with the other party when
they answer.
•
If you pressed the SPEAKER key,
pick up the handset to talk.
Comments:
♦
While the handset of the fax is lifted
(off hook), an extension phone
connected directly to the fax cannot
be used to speak with the other
party.
♦
The fax may interrupt a voice call
received on an extension phone if
the reception mode is set to A.M.
and there is a period of silence
during the conversation. If you are
on a touch-tone phone, you can
prevent this by pressing any three
keys on the phone immediately
after you answer. (Note: Do not
enter the code to activate fax
reception: 5,
* , * .)
all_ux340lm.book Page 63 Tuesday, November 28, 2000 3:09 PM