Sharp UX-340LM - Manual (Page 54)

Sending a Fax by Automatic Dialing
52
Error Correction Mode
The fax machine is set to
automatically correct any distortions
in a transmission due to noise on the
telephone line before printing at the
receiving end. This function is called
Error Correction Mode (ECM). ECM is
effective for both transmissions and
receptions, and is only effective when
the other fax machine has ECM as
well.
If desired, you can turn ECM off. This
will increase slightly the amount of
memory available for memory
transmission and reception.
1
Press these keys:
2
Press 1 to turn on ECM or 2 to turn
it off.
3
Press the STOP key to return to the
date and time display.
ECM MODE
FUNCTION
4
1 2 or
YES NO
STOP
all_ux340lm.book Page 52 Tuesday, November 28, 2000 3:09 PM