Sharp UX-340LM - Manual (Page 60)

Using TEL Mode
58
2 in 1 Print
To save paper, you can have the size
of your incoming faxes reduced by
55%. This will allow you to receive, for
example, a 2-page document on one
page (note that this may not be
possible if the document pages are
longer than your printing paper). To
turn on this function, follow the steps
below.
1
Press these keys:
2
Press 1 to turn on the 2 IN 1
function, or 2 to turn it off.
2 IN 1 PRINT
FUNCTION
Press 3
times
6
1 2 or
YES NO
3
Press the STOP key to return to the
date and time display.
STOP
Reception Ratio
The fax has been set at the factory to
automatically reduce the size of
received documents to fit the size of
the printing paper. This ensures that
data on the edges of the document
are not cut off. If desired, you can
turn this function off and have
received documents printed at full
size.
♦
If a document is too long to fit on
the printing paper, the remainder
will be printed on a second page. In
this case, the cut-off point may
occur in the middle of a line.
♦
Automatic reduction may not be
possible if the received document
is too large, contains too many fine
graphics or images, or is sent at
high resolution. In this case, the
remainder of the document will be
printed on a second page.
1
Press these keys:
RECEPTION RATIO
FUNCTION
Press
twice
6
all_ux340lm.book Page 58 Tuesday, November 28, 2000 3:09 PM