Sharp UX-340LM - Manual (Page 42)

Adjusting the Resolution and Contrast
40
Adjusting the Resolution and Contrast
If desired, you can adjust the resolution and contrast before sending a document.
Note: The resolution and contrast settings are only effective for sending a
document. They are not effective for receiving a document.
You must adjust the
settings each time you
don’t want to use the
default settings.
The default resolution
setting is STANDARD
and the default contrast
setting is AUTO.
Contrast settings
1
Load the document(s).
AUTO Use AUTO for normal
documents.
DARK Use DARK for faint
documents.
•
The document must be loaded
before the resolution and contrast
can be adjusted.
Resolution settings
STANDARD Use STANDARD for
ordinary documents.
This setting gives you
the fastest and most
economical
transmission.
FINE Use FINE for
documents containing
small letters or fine
drawings.
SUPER FINE Use SUPER FINE for
documents containing
very small letters or
very fine drawings.
HALF TONE Use HALF TONE for
photographs and
illustrations. The
original will be
reproduced in 64
shades of gray.
all_ux340lm.book Page 40 Tuesday, November 28, 2000 3:09 PM