Sharp UX-340LM - Manual (Page 50)

Sending a Fax by Automatic Dialing
48
2
Press the Rapid Key corresponding
to the desired Speed Dial number.
Rapid Key Dialing
If the number you want to dial has
been stored for Automatic Dialing as a
Speed Dial number from 01 to 04, you
can dial it by pressing the
corresponding Rapid Key.
1
Load the document(s).
Example: To dial Speed
Dial number 01, press
Rapid Key 01.
•
Set the resolution and/or contrast if
desired.
01
READY TO SEND
RESOLUTION
•
The name of the receiving party will
appear in the display. If no name
was stored, the fax number will
appear. (If the name or number is
incorrect, press the STOP key.)
•
The document will be automatically
transmitted once the connection is
established.
Speed Dialing
Speed Dialing can be used to dial
any number that has been stored for
Automatic Dialing.
1
Load the document(s).
•
Set the resolution and/or contrast if
desired.
RESOLUTION
2
Press the SPEED DIAL key and
then enter the Speed Dial number
by pressing the numeric keys.
•
To enter numbers 1 through 9, first
enter 0 and then the number.
(Example)
SPEED
DIAL
0 9
READY TO SEND
all_ux340lm.book Page 48 Tuesday, November 28, 2000 3:09 PM