Sharp UX-340LM - Manual (Page 88)

Timer Operations
86
Timer Operations
The Timer function allows you to set a transmission and/or polling operation to be
performed automatically at a time you specify. One transmission operation and one
polling operation can be set at any one time, and the times they will be performed
can be specified up to 24 hours in advance.
♦
You can use this function to take advantage of lower off-peak telephone rates
without having to be there when the operation is performed.
Note: Only a Speed Dial number can be used to dial the receiving machine.
Setting a timer operation
1
Press these keys:
2
Press # to set a transmission
operation (SEND MODE), or * to
set a polling operation (POLLING
MODE).
1
TIMER MODE
3
Press 1 to select SET.
0 5 9 2
Example: 9:25
4
Enter the time at which you want
the operation to take place (2 digits
for the hour and 2 digits for the
minute).
5
Press the
*
key to select A.M. or
the # key to select P.M.
FUNCTION
1
or
POLLING SEND
or
A.M. P.M.
6
Press the START/MEMORY key.
START/MEMORY
7
Enter the Speed Dial number of the
receiving fax machine.
•
If this is a polling operation, go to
Step 10.
0 5
(Example)
START/MEMORY
8
Press the START/MEMORY key.
all_ux340lm.book Page 86 Tuesday, November 28, 2000 3:09 PM