Siemens 2614 - Manual (Page 17)

3-6
Static IP Address (Fixed IP)
If your selected Static IP Address as your WAN connection type, the Simple Setup | WAN | Fixed IP
screen displays when you click More Configuration.
1. In the IP address assigned by your ISP boxes, enter your IP address.
2. In the Subnet Mask boxes, enter the subnet mask for the SpeedStream 2614: 255, 255, 255, 0
3. In the ISP Gateway Address boxes, enter the gateway address of your ISP.
Note:
You may need a fixed address if you want to provide Internet services such as a Web server or FTP server.
Most ISPs can provide you with a fixed address, most often for an additional monthly fee.
PPP over Ethernet (PPPoE)
If you selected PPP over Ethernet as your WAN connection type, the Simple Setup | WAN | PPPoE screen
displays when you click More Configuration.
1. In the User Name box, enter the user name assigned by your ISP.
2. In the Password box, enter the password assigned by your ISP.
3. In the Please retype your password box, enter the same password.
4. In the Service Name box, enter the service name if it is required by your ISP.
5. Click Enter to accept the settings and continue.
Dial-up on Demand (Modem)
If you selected Dial-up on Demand as your WAN connection type (via an ISDN TA or PSTN modem
attached to the SpeedStream 2614 serial port), the Simple Setup | WAN | Dial-up Modem screen displays
when you click More Configuration.
Note:
If your ISP has given you a secondary phone number, or if you have a secondary Internet service account,