Siemens 2614 - Manual (Page 14)

3-3
Configuration Changes
Configurable parameters are available by means of dialog boxes or drop-down lists. After you change a
configuration, be sure to click the Enter button at the bottom of the page to confirm the new setting.
To ensure proper screen refresh after a command entry, configure Internet Explorer 5.0 as follows (other
browsers or later browser versions may vary somewhat):
1. From the browser menu bar, click Tools.
2. On the Tools menu, click Internet Options.
3. On the Internet Options menu, click the General tab.
4. In the General box, select Temporary Internet Files.
5. In the Settings, box, select Every visit to the page to check for newer versions of stored pages each
time you connect to the server.
View Network and Device Status
From the Status screen, you can view WAN and LAN connection status, firmware and hardware version
numbers, any illegal attempts to access your network, and information on all DHCP clients connected to
your network.
Figure 3-2. Main/Status