Sharp PC-MM1 - Manual (Page 83)

5-11
5
Connecting Modem To Telephone Line
1. Turn off your computer.
2. Connect PC card connector end of the included modem cable to the connector of
the inserted modem card.
3. Connect the modular jack end of the modem cable to the telephone line.
4. Turn on your computer.
Connect the modem to the telephone line directly. Do not use a
distributor or allotter.
Configuring Modem
Configure your modem making the necessary adjustments as shown below.
Modem Configuration
When you use the modem first time, you must type your location’s information.
1. Click
start - Control Panel - Printers and Other Hardware; then, Phone and
Modem Options. If Classic view is selected, double-click Phone and Modem
Options icon.
2. In Location Information dialog box, select your country, type your area code,
etc., and select your dial type; then, click OK.
After the configuration, click or double-click Phone and Modem Options (icon) to
open Phone and Modem Options dialog box and double-click the location name of
Locations in Dialing Rules tab for the information you set above.
You can change the settings or make a new location by clicking Edit… or New….