Power management – Sharp PC-MM1 User Manual
Page 47
3-7
3
Power Management
Power management saves electricity and extends battery life by controlling power
supply to built-in devices. You can set the following power management properties on
Windows.
•
Stopping power supply to the hard disk
•
Stopping power supply to the display
•
Using System standby/hibernate
To open Power Options Properties dialog box, click start – Control Panel, and click
Performance and Maintenance; then, Power Options. If Classic view is selected,
double-click Power Options icon.
Note that the power management may not seem to function when you are
using an application program that accesses the hard disk periodically.
Stopping Power Supply to Hard Disk
1. In
the
Power Options Properties dialog box, select Power Schemes tab.
2. Set
Turn off hard disks to an appropriate value, and click OK.
3. Close
the
Control Panel window.
Stopping Power Supply to the Display
This procedure is also effective for an attached external monitor complying
with power management.
1. In
the
Power Options Properties dialog box, select Power Schemes tab.
2. Set
Turn off monitor to an appropriate value, and click OK.
3. Close
the
Control Panel window.